1C Series Cast Iron QD Sheaves for “C” Belts
1C series single-groove QD bushed sheaves are manufactured for C, CX, banded belts, and CC v-belts; they range from 7.40″ to 24.40″ in diameter. Depending on the sheave size, they are made to use SF QD (quick detachable) bushings, which we also stock. Most of our 1C QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
Construction Hoist Pinion
- Another advantage of the rack and pinion lift is that it does not depend on cables. Its drive motor is built into the top of the elevator, and its pinion is attached to its motor. Rack and pinion lifts are designed for outdoor construction sites and can be installed with a crane. They are specially made for outdoor use, so they are usually installed outside of buildings.
Engineer class Sprocket for 830 Series chains
830 series engineer class sprocket is used for a wide verity of chain sizes. These sizes include 830, 6830, SR830, 830R, HSB830, and RR830 size chains. These sprockets are typically supplied as cast material but we can also supply them as steel for longer operation. The below chart shows the standard tooth counts as well as dimensions for each size.
81X Chain Sprockets A Plate B C Hub
A wide selection of 81X roller chain sprockets are available at Power-transtech. All of our 81x sprockets are manufactured using high-quality materials and are precision manufactured for optimum performance and working life. The majority of out 81X chain sprockets are manufactured from steel, but we also have cast sprockets.
Bronze Bushed Idler Sprockets
sprocket is categorized as a needle bearing idler sprocket due to the needle bearing that is inserted into the sprocket. Additionally this idler sprocket was engineered to be extremely durable and high performance, along with being manufactured out of a high quality steel and components to create an idler sprocket with great performance and a long working life.
R1 Split Taper Bushings
- Bushing Type: R1
- Bore Size: 1-1/16″、1-1/4″、1-1/8″、1-3/16″、1-3/8″、1-7/16″、28mm、3-11/16″、3-3/16″、30mm、32mm、35mm、36mm、38mm、39mm、40mm、42mm、45mm、48mm、50mm、55mm、60mm、65mm、70mm、75mm、85mm、90mm、95mm
- Dimension (L): 2-7/8″
- Dimension (U): 5/8″
- Dimension (T): 2-1/4″
- Dimension (D): 2.875″
- Dimension (H): 5-3/8″
- Dimension (V): 4-5/8″
- Dimension (W): 3/4″
- Dimension (X): 2″
- Dimension (Y): 1/4″
- Dimension (R): 1/4″
- Dimension (S): 9/32″
- Cap Screws Amount: 3
- Cap Screw Size: 3/8″ X 1-3/4″
- Wrench Torque: 348 LBS
- Weight: 7.5 LBS
F963R Series Sprockets C type Hub
We also offer a full range of both precision roller chain and engineered.
Applications are varied and range from conveyor, elevator transfer to broad general industrial power transmission specialty applications with attachments and/or special materials are also available.
conveyor chains(ZE series)
High Quality:
Corrosion resistance
Durable, Robust and Reliable
Bad condition resistance
Lower weight–high speed
Conveyor chains Z series
Conveyor chains (Z series) is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles.
SWL screw jack for lift system power transmission 180 ratio reduction gearbox shaft mount reducer bevel helical gear unit 2
Heat treatment: Carburising, quenching, gear grinding
Bearing: U&C
Packaging Details: Standard exporting package
Port: Ningbo Port, Shanghai Port
SWL series Screw jacks for lift system tables has the features of compacted structure, light and portable, flexible, reliable, long service life, easy to installation, and self-locking while stop.
JA QD Type Bushings
1.Make sure the cone on the bushing and the inside of the driven product is clean and free of oil or any anti-seize lubricant.
2. Slide QD bushing on a shaft, flange end first, then assemble key.
3. Place the QD bushing on the shaft. Use only a standard Allen key to tighten the set screw on the key (hand-tight). Don’t push too hard.
Nylon Spur Gear
Nylon spur gears are a type of mechanical gear made from nylon, a strong and durable thermoplastic material. Nylon spur gears are the most common type of gear and are characterized by their straight teeth that project radially from a cylindrical gear body. They are used to transmit power and motion between parallel shafts in a wide range of machinery and equipment, such as electric motors, power tools, and conveyor systems. Nylon spur gears have several advantages over other materials, such as metal or brass. They are lightweight, corrosion-resistant, and have a lower coefficient of friction, which means they generate less heat and noise during operation.
FVC series hollow pin conveyor chains
Applications:
- Wood processing industry
- Steelmaking industry
- Automotive industry
- Bulk goods transport
- Environmental technology, Recycling
FVT series conveyor chains
High Performance:
- Strong Ultimate tensile strength
- Perfect surface treatment
- Durable,Flexible
Plastic Bevel Gear
This type of gear has a conical shape with straight or spiral-cut teeth. Plastic bevel gears transfer motion between two axles that are intersecting, changing the rotation axis. These types of gear are mostly utilized in power tools and automotive applications. On all designs, the spiral cut version can be smoother and less noisy than other designs.
CNC nylon rack plastic MC901 gear rack for sliding gate
Processing:cnc machined
Standard or Nonstandard:Nonstandard
Color:natural, blue, and others.
Density:1.2
Thickness:5-250MM
Certificate:ISO9001, test report
U1 Split Taper Bushings
- Bore Size: 2-1/2″、2-11/16″、2-15/16″、2-3/4″、2-3/8″、2-5/8″、2-7/16″、2-7/8″、3″、3-1/2″、3-1/4″、3-1/8″、3-11/16″、3-15/16″、3-3/16″、3-3/4″、3-3/8″、3-5/8″、3-7/16″、3-7/8″、4″、4-1/2″、4-1/4″、4-1/8″、4-15/16″、4-3/16″、4-3/4″、4-3/8″、4-5/8″、4-7/8″、5″、5-1/2″、5-1/4″、5-1/8″、5-3/16″、5-3/8″、5-7/16″、
M series conveyor chains
Products are widely used in mechanized conveying and loading equipment in metallurgy, mining, sugar, wine, ceramics, papermaking and other industries.
J QD Type Bushings
J bushing(J QD Type Bushings) is a high-quality, extremely durable, and high-precision product made of solid steel. What really sets these J QD style bushings apart is the extensive quality control program done to ensure you receive a consistent and high-quality product. J bushings have a wide range of applications, most commonly used in sprockets, pulleys, and more! We make it easy to do business with us. Plus, we’re your one-stop-shop for almost any powertrain product!