Split Taper Bushes – Secure Shaft Mounting for Industrial Applications
Split Taper Bushes
Product Overview
Split Taper Bushes deliver a reliable solution for mounting pulleys, sprockets, and hubs onto shafts. The split tapered structure allows the bushing to clamp tightly around the shaft as installers tighten the bolts. This design creates a secure friction fit that supports high torque transmission while maintaining accurate alignment.
Equipment manufacturers and maintenance teams choose Split Taper Bushes when they need dependable performance and efficient installation.
How This Split Taper Bushing Works
The tapered surfaces of the bushing translate bolt tightening force into uniform radial pressure around the shaft. As the two split halves draw together, the bushing grips the shaft evenly and holds the mounted component firmly in place.
This method eliminates uneven stress and reduces the risk of slippage during operation.
Product Features & Benefits
Strong Torque Transmission
Split Taper Bushes maintain consistent shaft contact across the full bore surface, allowing them to handle demanding torque loads without relying on excessive keyway stress.
Fast Installation and Removal
The split design enables quick mounting and dismounting using standard tools. Maintenance teams can service equipment without removing the entire drive assembly.
Accurate Shaft Alignment
The tapered clamping action centers mounted components precisely on the shaft, improving power transfer efficiency and reducing vibration.
Shaft Protection
Even pressure distribution prevents localized wear and helps extend shaft and component service life.
Applications
This Split Taper Bushing supports a wide range of industrial power transmission systems, including:
-
V-belt and timing belt pulleys
-
Roller chain sprockets
-
Industrial gears and hubs
-
Conveyor systems
-
Agricultural and heavy-duty machinery
Material & Build Quality
Manufacturers produce Split Taper Bushes from high-strength cast iron or steel to ensure durability under continuous load. Precision-machined taper surfaces deliver consistent fit and repeatable performance. Optional surface treatments enhance corrosion resistance in demanding environments.
Compatibility & Selection
Split Taper Bushes fit standard shaft sizes and match common pulley and sprocket configurations. Multiple bore sizes and series options allow easy selection for both new installations and replacement needs.
For best results, users should match the bushing series, bore size, and mounted component specifications.
Why Choose This Split Taper Bushing?
This Split Taper Bushing combines strength, accuracy, and service convenience in one compact component. It supports stable power transmission while simplifying maintenance work. Engineers and technicians rely on this design for dependable performance across a wide range of industrial applications.
Split taper bushings are mechanical components used for mounting pulleys, sprockets, and other devices onto shafts. Unlike solid bushings, split taper bushings have a split design, allowing for easy installation and removal. They feature a tapered surface that matches the taper on the hub of the mounted component. This taper facilitates a tight and secure fit when the bushing is tightened onto the shaft.
Split bushings are commonly used in power transmission applications, providing a convenient and efficient means of connecting rotating elements to shafts while simplifying assembly and disassembly processes.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.