WPWEK Series Double Stage Worm Gearboxes
Worm gearbox design to improve its application power, the worm gear uses non-ferrous metal as the primary data. The worm generally uses hard steel, so it is easy to generate large heat during the application, plus the influence of the ambient temperature. The temperature of the reducer is challenging to control as the operating temperature range is.
4040 Taper Lock Bushings
- Bushing Number: 4040
- Bore: 1″、1/2″、10mm、11/16″、11mm、12mm、13/16″、14mm…..
- Dimension (A): 5-3/4″
- Dimension (B): 4″
- Dimension (D): 5.54″
- Number Of Set Screws: 3
- Threads: 5/8″
- Length: 1-3/4″
- Dimension (G): 40°
- Wrench Torque: 1,700 LBS
- Weight: 21 LBS
Light Load Drive Timing Belt Pulley T5/T10/T20 Type
The light load transmission timing belt pulley is suitable for trapezoidal tooth transmission. Made of aluminum, these pulleys have good corrosion resistance. The teeth match up with the grooves along the inside diameter of a timing belt to move components forward or backward. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width. Pulleys without a shaft diameter have a pilot bore so that you can customize them to your needs.
Timing Belt Pulley S3M Type
A timing belt pulley has teeth or pockets around the diameter of the pulley body. The specialized design maintains accurate timing by locking the pulleys in the system using a belt with similar teeth and pockets. This allows the two rotating shafts to be locked together, allowing them to rotate continuously at the same speed and hold position alignment for the system’s life.
F X 1-3/16″ Inch Size QD Bushing
This E QD style bushing(Inch Size QD Bushing) is a high-strength premium bushing with a 1″ hole. What sets this bushing apart from other bushings is the high-quality steel construction and strict quality control procedures focused on quality, value, and premium quality customer service. We also have a team of highly trained experts to answer any questions you may have. For more information or to get a great quote, please contact us and we’ll be happy to help!
5040 Taper Lock Bushings
Taper Lock Bushing Size Chart
The dimension table below shows the standard dimensions of the taper lock bushing, please note that the following figure is the basic dimension required, the actual installation and removal of the bolt holes may vary.
Sprockets and Idler Wheels for 821-lbp821 Chain
Plastic sprockets are commonly used as an alternative to metal sprockets in power transmission and roller chain applications. Manufactured from cast oil-filled nylon, they offer a wide range of benefits over traditional metal counterparts, such as self-lubricating properties and a reduced coefficient of friction. This helps reduce wear on the plastic chain and noise levels of the application. Other benefits include better resistance to corrosion, increased impact strength, and lighter weight than metal alternatives. Split sprockets can also be supplied for applications whereby the machinery is not able to be dismantled. They are provided in two halves and can be assembled around the installation, removing the need for equipment to be taken apart.
XRV Series Car Wash Gearbox For Automatic Car Wash System
XRV series reducer for an automatic car wash is a special worm gear reducer used for auto car washers， which has the advantages of easy installation， low noise， long life, and high protection class. The protection level can reach IP56. The supporting motor power can be 0.25kw~0.75kw， and matching flanges to meet the different needs of customers.
WPWA Series Universal Speed Worm Gearboxes
A worm gear reducer is a traditional transmission device, the inside is a turbine worm, and the tooth shape is involute. WPWA series worm gearboxes are made of 45 # steel through heat treatment processing. And the worm gear is cast with tin bronze. It has good wear resistance, especially outstanding in bearing capacity. It mainly applies to the reduction drive of various mechanical equipment such as plastic, metallurgy, beverage, mining, hoisting and transportation, and chemical construction.
1108 Taper Lock Bushings
- Bushing Number: 1008
- Bore: 1″、1/2″、10mm、11/16″、11mm、12mm、13/16″、14mm…..
- Dimension (A): 1.511″
- Dimension (B): 7/8″
- Dimension (D): 1-29/64″
- Number Of Set Screws: 2
- Threads: 1/4″
- Length: 1/2″
- Wrench Torque: 55 LBS
- Weight: 0.25 LBS
Steel Rack for Sliding Gate Motor Steel Gear Rack For Sliding Gate
There are various options for steel racks(Sliding Gate Motor Gear) for sliding doors. You can choose the size according to your needs, one or two meters. You can also choose a design that fits your gate. These products are suitable for residential and industrial sliding doors. The most popular size is 2m, but you can choose the length according to your requirements. Steel rack with six fixing points. You should make sure your gate has enough space for the rack.
TPW Welded Plate Top Chains
Plate-top chains are a hybrid of steel roller chains and plastic plates – an ingenious way of combining the advantages of both materials. Plate-top chains use specially adapted high-quality rollers for tensile force transmission. The product load is borne by plastic flights that are custom-designed for the respective application, enabling the use of the dry running characteristics of a plastic-to-plastic pairing.
WPES Series Double Stage Worm Gearbox
The worm gear reducer is a power transmission mechanism that uses the speed converter of the gear to decelerate the number of revolutions of the motor to the required number of revolutions and obtain a large torque mechanism. In the mechanism used to transmit power and motion, the application range of reducer is quite extensive.