Inch Series Solid Shaft Collars
Metric series set screw shaft collars are mechanical components used to provide mechanical stability and positioning to rotating shafts. These set screw shaft collars are designed to fit onto shafts with a specific diameter and are used to prevent axial movement of the shaft and to attach components such as bearings, sprockets, or pulleys. The “metric series” designation refers to the fact that these shaft collars are designed using the metric system of measurement, which is commonly used in many countries around the world. The set screw shaft collars are available in a range of sizes to fit different shaft diameters, typically ranging from a few millimeters to several centimeters.
Set Screw Shaft Collars – Inch Series Solid Shaft Collars
Inch Series Solid Shaft Collars are mechanical components used to provide mechanical stability and positioning to rotating shafts. We are designing these set screw shaft collars to fit onto shafts with a specific diameter. Used to prevent axial movement of the shaft and to attach components such as bearings, sprockets, or pulleys.
The “metric series” designation refers to the fact. These shaft collars are using the metric system of measurement. We commonly using the metric system of measurement in many countries around the world. The set screw shaft collars are available in a range of sizes to fit different shaft diameters. Typically ranging from a few millimeters to several centimeters.
The term “set screw” refers to the method of attachment used to secure the shaft collar onto the shaft. Set screws are threading fasteners. Tighten they against the shaft to hold the shaft collar in place. They are typically located on one or more flat surfaces on the shaft collar and are tightened using a hex key or similar tool. Overall, metric series set screw shaft collars are simple yet effective mechanical components. The applications of shaft collars is in a variety of industrial and commercial applications to provide stability and positioning to rotating shafts.
 |
 |
Set Screw Shaft Collar Sizes Chart (Inch Series)
 |
 |
| PART NUMBER STEEL | PART NUMBER STAINLESS STEEL | BORE B (mm) | OUTER DIAM. OD (mm) | WIDTH W (mm) | FORGED SET SCREW |
| MSC-4-F | MSC-4-SS | 4 | 8 | 5 | M2.5X3 |
| MSC-5-F | MSC-5-SS | 5 | 10 | 6 | M3X4 |
| MSC-6-F | MSC-6-SS | 6 | 12 | 8 | M4X4 |
| MSC-8-F | MSC-8-SS | 8 | 16 | 8 | M4X4 |
| MSC-10-F | MSC-10-SS | 10 | 20 | 10 | M5X5 |
| MSC-12-F | MSC-12-SS | 12 | 22 | 12 | M6X6 |
| MSC-14-F | MSC-14-SS | 14 | 25 | 12 | M6X6 |
| MSC-15-F | MSC-15-SS | 15 | 25 | 12 | M6X6 |
| MSC-16-F | MSC-16-SS | 16 | 28 | 12 | M6X8 |
| MSC-18-F | MSC-18-SS | 18 | 32 | 14 | M6X8 |
| MSC-20-F | MSC-20-SS | 20 | 32 | 14 | M6X8 |
| MSC-22-F | MSC-22-SS | 22 | 36 | 14 | M6X8 |
| MSC-25-F | MSC-25-SS | 25 | 40 | 16 | M8X8 |
| MSC-28-F | MSC-28-SS | 28 | 45 | 16 | M8X10 |
| MSC-30-F | MSC-30-SS | 30 | 45 | 16 | M8X8 |
| MSC-32-F | MSC-32-SS | 32 | 50 | 16 | M8X10 |
| MSC-35-F | MSC-35-SS | 35 | 56 | 16 | M8X12 |
| MSC-38-F | MSC-38-SS | 38 | 56 | 16 | M8X10 |
| MSC-40-F | MSC-40-SS | 40 | 63 | 18 | M10X12 |
| MSC-45-F | MSC-45-SS | 45 | 70 | 18 | M10X12 |
| MSC-50-F | MSC-50-SS | 50 | 80 | 18 | M10X16 |
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.