Straight Running Flat-top Chain with Low Noise Accumulation Rollers
This new series of thermoplastic chains is the solution to the pressure created between products and the conveying surface created by the accumulation of products. This is achieved by having a series of small-width rollers, which provides a stable conveying surface and enables the product to be handled without damage; however, the chain still provides a positive forward motion and is based on our standard series. These chains feature rollers made of low-friction and low-noise materials for reduced packing line stress and quiet operation.
NEMA Stainless Steel Stepper Motor With Double Capacitor
Our electric stainless steel / flush motor adopts enclosed fan cooling (Tens) or enclosed non-ventilated (ten) enclosure with protection grade of IP56, which can provide waterproof protection. These flushing motors are ideal for conveyor, pump, and material handling applications in the food, beverage, pharmaceutical, and poultry industries.
H Type Timing Belt Pulley
A timing belt pulley is a specialized pulley system with teeth or pockets outside the pulley body’s diameter. Like traditional pulley systems, timing belt pulleys are driven by frictional forces between the belt and pulley surfaces. The teeth or pockets outside the pulley are not used for power transmission. Instead, they engage the pulley belt, assisting with timing and averting misalignment.
TEFC Stainless Steel NEMA Washdown Electric Motor
TEFC Stainless Steel NEMA Washdown Electric Motor
Over time, equipment downtime has been typical in food and beverage factories. Many indoor cabinets must prevent excessive moisture from hose guiding or splashing (Flushing). Flushing motors are designed for use in food and beverage plants and other applications where motors are frequently exposed to flushing and contaminants (chemicals, moisture, and moisture).
Flush the motor to protect the motor’s internal components (stator winding, stator assembly, rotor, and shaft).
IEC B5 Flange Mounted Stainless Steel Motor -TENV
IEC Flange Mounted Stainless Steel Motor -TENV
Stainless steel motor is the most comprehensive motor. Because of its diversity, it can be used in all possible environments. Its advantages are clear at a glance:
- IP68 waterproof and dustproof
- Clean room classification ISO 1 according to DIN 14644
- ATEX certification for ATEX zone 1
- Acid and chemical resistance
- Hydrogen peroxide can be used for sterilization
- Efficient and powerful
TENV Stainless Steel Washdown NEMA Motor With Single Capacitor
stainless steel NEMA motor
all outer surfaces of stainless steel motor frames, end plates, conduit boxes, shafts and bases, four condensate drains in each end plate, conduit box gasket lip seals. It is especially suitable for highly corrosive environments where paint or other surface treatments cannot maintain working conditions: the motor is designed and manufactured according to IEC standards, and all external surfaces are stainless steel, which is very suitable for driving food processing, packaging, outdoor and highly corrosive environments.
B14 Face Mounted Stainless Steel Motor TEFC
To ensure reliable consumer protection, the design requirements for food and pharmaceutical machinery have always been high. All components in the machine must also meet these requirements.
Since its establishment, our company has continuously developed stainless steel servo motors, gear motors, and torque motors with hygienic designs. To achieve CIP, a comprehensive range of products can be used with corrosive and effective cleaners, disinfectants, and high-pressure cleaners.
IEC Motor B5T Flange Mounted Stainless Steel Motor TENV replacement of SEW Motor
Our severe washdown duty motors are designed to withstand the extreme and stringent sanitation requirements of today’s food processing, pharmaceutical, packaging, and beverage industries. Tested to meet the demanding IP69K specification using high-pressure steam and water, Power-trans’s food-safe stainless motors provide durable protection against the most extreme caustic washdown environments while maintaining a hygienic level to ensure uncompromised food safety.
IEC B14 Face Mounted Stainless Steel Motor -TENV
Face Mounted Stainless Steel Motor
Power-trans’s food safety Face Mounted stainless steel motors for food and beverage plants can withstand high-pressure cleaning, easily maintain hygienic standards, and reduce downtime.
Designed for industries that need high hygiene, such as meat, poultry, fish, dairy products, beverages, and places where high food safety is critical.
TEFC NEMA Stainless Steel Motor
The food industry is a wide range of applications, covering a variety of processes and combinations of different types of products.
The environment of the food industry is usually harsh. The environmental temperature of the equipment is very high or low, humid, and even requires frequent cleaning with corrosive chemical products. In addition, the food industry should maintain high hygiene standards. It will be a big challenge for the equipment used in the industry.
IEC Stainless Steel Motor B3 Foot Mounted TEFC
Stainless steel motor is hygienic in design, smooth in body, and IP66 in protection grade, suitable for all flushing and sanitary applications. Ours motor is designed to withstand frequent high pressure and high-temperature flushing. All external components, including the motor shaft, are 300 series stainless steel. This provides excellent corrosion resistance because there is no paint falling off, and it is resistant to the disinfection chemicals used in the cleaning process. It provides a lasting solution in which hygiene is crucial.
IP67 Waterproof NEMA Stainless Steel Motor TENV
This NEMA Stainless Steel Motor has two structural forms: fully enclosed self-cooling and fully enclosed fan cooling. It conforms to NEMA standards and has high-efficiency characteristics. The efficiency of motors above 1HP meets the premium efficiency standard. The motor shell, end cover, hood, shaft outlet, foot, and junction box are made of stainless steel, and the outer surface is not painted. This motor is widely used in food machinery and pharmaceutical machinery industry.
B5 Flange Mounted Stainless Steel Motor-TEFC For Food machinery
The stainless steel motors produced by our company can be made of stainless steel 302, 304, or 316 according to customer requirements. The standard product is made of food-grade 304 stainless steel, which can be used for a long time without rust and corrosion. The standard motor shaft is made of stainless steel 420.
Vacuum KMBD Roots Pump Replacement of Kinney KMBD540 KMBD2000
Our vacuum pump can perfectly replace the Kinney vacuum pump, the following is the corresponding model of Kinney. We provide customers with vacuum equipment to meet their professional needs. Main products: single-stage rotary vane vacuum pump (XD, x), two-stage rotary vane vacuum pump (2x, 2XZ), roots pump (ZJ, JP), water ring pump (SZ, 2BV, 2BEA), vacuum system (water ring closed-loop system, roots rotary vane unit, etc.), vacuum technology solution system.
Single-Stage Rotary Piston Vacuum Pump Replacement For Kinney KT150 KT300
The Single-Stage Rotary Piston Vacuum Pump has many advantages: Relatively cheap and high capacity at deep vacuum levels (<0.01 Torr)
The rugged design allows for a long life
Can allow trace amount of solvents
8C Series Cast Iron QD Bushed Sheaves for C Belts | Industrial V-Belt Pulleys
8C series eight-groove QD bushed sheaves are manufactured for C, CX, banded belts, and CC v-belts; they range from 8.40″ to 50.40″ in diameter. Depending on the sheave size, they are made to use E, F, J, or M QD (quick detachable) bushings, which we also stock. Most of our 8C QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
10C Series 10 groove Cast Iron QD bushing Sheaves for C Belts
10C series ten-groove QD bushed sheaves are manufactured for C, CX, banded belts, and CC v-belts; they range from 8.40″ to 50.40″ in diameter. Depending on the sheave size, they are made to use an E, J, or M QD (quick detachable) bushings, which we also stock. Most of our 10C QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
12C Series Cast Iron QD Sheaves for C Belts
12C series twelve-groove QD bushed sheaves are manufactured for C, CX, banded belts, and CC v-belts; they range from 9.40″ to 50.40″ in diameter. Depending on the sheave size, they are made to use either J or M QD (quick detachable) bushings, which we also stock. Most of our 12C QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
Rotary Mowers Gearboxes – Replacement of Comer Code T-25J speed increasing
- Various (agricultural) applications
- s
- Chemical fertiliser spreaders
- Band saws
O-Ring Chain 428H 520H 525H 530H
1. Superior quality alloy steel for pins;
2. Quad-riveted pins (pitch≥15.875mm);
3. Superior quality alloy steel for Solid bushes;
4. Superior quality alloy steel for roller.
Shaft Collars with Double Splits Metric Series-1
The metric series two piece shaft collars are mechanical components used to secure and position different machine parts on a shaft. They consist of two pieces that clamp around the shaft and lock in place with screws or bolts. These metric series two piece shaft collars are commonly used in various industries, including automotive, aerospace, and manufacturing. They are designed to withstand high axial loads and provide a precise and secure fit for the shaft. If you are looking for a reliable and versatile way to secure components to a rotating shaft, then a metric series two piece shaft collar is a good option.
Shaft Collar With One Split Inch Series
The inch series one piece shaft collars are mechanical components used to secure and position objects on a shaft. They are usually made of metal or plastic and consist of a cylindrical ring with a set screw that tightens onto the shaft, creating a mechanical interference fit. The one piece shaft collar refers to the design where the collar is a single piece without any separate components. The one-piece design means that the collar is a single piece without any separate components. This design provides a reliable and easy-to-use method of securing components onto a shaft, as it only requires one piece to be installed.
Herringbone Gears
A herringbone gear is a combination of double helical gears with two helices arranged on opposite sides of the hand. The teeth of the herringbone gears are arranged at an angle called the helix angle, with no gaps between the left and right helixes, appearing in the shape of the letter “V” These letters together form a pattern that resembles a fishbone structure. Since this structure has more than two teeth meshing with each other at the same time, the advantage is that the power transmission is smooth.