Metal Internal Gear
Dimension:Φ3mm- Φ120mm
Module: M2.0
Material Type: Metal as customer required
-
- Internal Gears provide a compact parallel shaft transmission drive with considerable speed reduction.
- Internal gear is a gear with its teeth cut in the internal surface of a cylinder and meshes with spur gears.
Aircraft Internal Gear
- Dimension:Φ3mm- Φ120mm
- Module: M0.15
- Material Type: Metal as customer required
Cement Mixer Ring Gear
One of the simplest and most used gear units, external ring gears are extensively used in gear pumps and other industrial products for smooth functioning.
Inch Series Solid Shaft Collars
Metric series set screw shaft collars are mechanical components used to provide mechanical stability and positioning to rotating shafts. These set screw shaft collars are designed to fit onto shafts with a specific diameter and are used to prevent axial movement of the shaft and to attach components such as bearings, sprockets, or pulleys. The “metric series” designation refers to the fact that these shaft collars are designed using the metric system of measurement, which is commonly used in many countries around the world. The set screw shaft collars are available in a range of sizes to fit different shaft diameters, typically ranging from a few millimeters to several centimeters.
Automotive Internal Gear
- Dimension: Φ3mm- Φ120mm
- Module: M0.2
- Material Type: Metal as customer required
Forklift Gears
Power Transmissions and industrial Parts Manufacturer ,One stop solution of power transmission and industrial products.Hangzhou Powertrans Technology Co.,Ltd. is a group of factories( manufacturers ), We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears & racks, speed reducers, motors, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide,rod end, clevis, hydraulic cylinder,rubber mount,Parallel shaft helical gear reducers, planetary gearboxes, worm reducers, in-line helical gear speed agricultural reducers, helical bevel reducers, helical worm gear reducers,agricultural gearboxes, tractor gearboxes, auto gearboxes, pto drive shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vaccum pumps, fluid coupling, udl speed variators, gear pumps, screw air compressors, low backlash worm reducers , etc. We make special parts according to drawings and/or samples.
Ring Gear For Aerospace and Satellite
Ring gears have a diversified industry presence and are typically used in passenger cars, trucks, tractors, aerospace and satellite, marine engines, lawnmowers, and industrial/power generation.
Stainless Steel Ring Gear For Wind Turbine
- Gear Tooth Shape: involute
- Gear Material:42CrMo
- Pressure Angle:20°
- Quality level: DIN 3962 class 7
Screw Gear crossed helical gears
Screw gears, also sometimes called crossed helical gears, are helical gears used in motion transmission between non-intersecting shafts. Screw gears can be used to transmit power between non-parallel shafts. This is because the helical teeth allow the gears to mesh even when the shafts are not aligned. Screw gears are also able to transmit high torques, which makes them ideal for applications such as hoists and winches. Screw gears can be made from a variety of materials, including steel, stainless steel, and plastic. The material used will depend on the application and the loads that the gear will be subjected to.
Alloy Steel Internal Ring Gear
Our precision-engineered Ring Gears deliver excellent performance. These are rings having teeth fitted on the periphery of a flex plate or flywheel of an internal combustion engine and find usage in automotive applications.
6D Series Cast Iron QD Bushing Sheaves Pulley for D Belts
6D series six-groove QD bushed sheaves are manufactured for D-series classic v-belts and D-banded belts; they range from 12.64″ to 58.64″ in diameter. Depending on the sheave size, they are made to use J, M, or N QD (quick detachable) bushings, which we also stock. Most 6D QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
12D Series Cast Iron QD Bushing Sheaves Pulley for D Belts
12D series twelve-groove QD bushed sheaves are manufactured for D-series classic v-belts and D-banded belts; they range from 12.64″ to 58.64″ in diameter. Depending on the sheave size, they are made to use M, N, or P QD (quick detachable) bushings, which we also stock. Most of our 12D QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
10D Series Cast Iron QD Bushing Sheaves Pulley for D Belts
10D series ten-groove QD bushed sheaves are manufactured for D-series classic v-belts and D-banded belts; they range from 12.64″ to 58.64″ in diameter. Depending on the sheave size, they are made to use M, N, or P QD (quick detachable) bushings, which we also stock. Most of our 10D QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
4D Series Cast Iron QD Bushing Sheaves Pulley for D Belts
4D series four-groove QD bushed sheaves are manufactured for D-series classic v-belts and D-banded belts; they range from 12.64″ to 58.64″ in diameter. Depending on the sheave size, they are made to use an F, J, or M QD (quick detachable) bushings, which we also stock. Most of our 4D QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
8D Series Cast Iron QD Bushing Sheaves Pulley for D Belts
8D series eight-groove QD bushed sheaves are manufactured for D-series classic v-belts and D-banded belts; they range from 12.64″ to 58.64″ in diameter. Depending on the sheave size, they are made to use J, M, or N QD (quick detachable) bushings, which we also stock. Most of our 8D QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
3V Series Cast Iron Four-Groove Sheaves with Split Taper Bushings
3V series four-groove taper bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 2.65″ to 33.50″ in diameter. Depending on the sheave size, they are made to use G, H, P1, Q1, or R1 split-taper bushings, which we also stock. Most of our four-groove 3V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
2AKH Series Cast Iron Double Groove Sheaves Pulleys for 4L or A Belts
2AKH series pulleys are manufactured for 2 banded A-Series V-Belts or two single A-Series V-Belts, as well as multiple 3L and 4L v-belts can also be used with these pulleys. 2AKH series pulleys are made to use H-series bushings and are commonly known as double AKH bushed pulleys and range in diameter from 3.05″ to 18.25,” but custom ones are also available upon request. 2AKH series pulleys are typically used in medium to heavy-duty agricultural and industrial applications.
3V Series Cast Iron Three-Groove Sheaves with Split Taper Bushings
3V series three-groove taper bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 2.65″ to 33.50″ in diameter. Depending on the sheave size, they are made to use G, H, P1, Q1, or R1 split-taper bushings, which we also stock. Most of our three-groove 3V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
3V Series Cast Iron Two-Groove Sheaves with Split Taper Bushings
3V series two-groove taper bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 2.65″ to 25.0″ in diameter. Depending on the sheave size, they are made to use G, H, P1, or Q1 split-taper bushings, which we also stock. Most of our two-groove 3V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
5D Series Cast Iron QD Bushing Sheaves Pulley for D Belts
5D series five-groove QD bushed sheaves are manufactured for D-series classic v-belts and D-banded belts; they range from 12.64″ to 58.64″ in diameter. Depending on the sheave size, they are made to use an F, J, or M QD (quick detachable) bushings, which we also stock. Most of our 5D QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
3V Series Cast Iron Three-Groove QD Sheaves for 3V Belts
3V series three-groove QD (quick detachable) bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 2.50″ to 33.50″ in diameter. Depending on the sheave size, they are made to use a JA, SH, SDS, SK, or SF QD bushing, which we also stock. Most of our three-groove 3V QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
3V Series Cast Iron Eight-Groove QD Sheaves for 3V Belts
3V series eight-groove QD (quick detachable) bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 4.75″ to 33.50″ in diameter. Depending on the sheave size, they are made to use an SK, SF, E, or F QD bushing, which we also stock. Most of our eight-groove 3V QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
3V Series Cast Iron Four-Groove QD Sheaves for 3V Belts
3V series four-groove QD (quick detachable) bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 2.65″ to 33.50″ in diameter. Depending on the sheave size, they are made to use a JA, SH, SDS, SK, SF, or E QD bushing, which we also stock. Most of our four-groove 3V QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
3V Series Cast Iron Five-Groove Sheaves with Split Taper Bushings
3V series five-groove taper bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 2.65″ to 33.50″ in diameter. Depending on the sheave size, they are made to use P1, Q1, or R1 split-taper bushings, which we also stock. Most of our five-groove 3V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
3V Series Cast Iron Double-Groove QD Sheaves for “3V” Belts
3V series double-groove QD (quick detachable) bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 2.20″ to 25.00″ in diameter. Depending on the sheave size, they are made to use a JA, SH, SDS, SK, or SF QD bushing, which we also stock. Most of our double-groove 3V QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
8V Series Cast Iron Ten-Groove Pulley Sheaves with Split Taper Bushings
8V series ten-groove taper bushed sheaves are manufactured for 8V and 8V banded v-belts. They range from 12.5″ to 64.0″ in diameter. Depending on the sheave size, they are made to use U1 or W1 split-taper bushings, which we also stock. Most of our ten-groove 8V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
5V Series Cast Iron Five-Groove Sheaves with Split Taper Bushings for “5V” Belts
5V series five-groove taper bushed sheaves are manufactured for 5V, 5VX, banded 5V, and banded 5VX belts. They range from 4.60″ to 50.0″ in diameter. Depending on the sheave size, they are made to use Q2, R1, S1, or U1 split-taper bushings, which we also stock. Most of our five-groove 5V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
5V Series Cast Iron Ten-Groove Sheaves with Split Taper Bushings for “5V” Belts
5V series ten-groove taper bushed sheaves are manufactured for 5V, 5VX, banded 5V, and banded 5VX belts. They range from 7.10″ to 50.0″ in diameter. Depending on the sheave size, they are made to use an R2, S1, or U1 split-taper bushings, which we also stock. Most of our ten-groove 5V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
3V Series Cast Iron Single-Groove QD Sheaves for 3V Belts
3V series single-groove QD (quick detachable) bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 2.20″ to 19.00″ in diameter. Depending on the sheave size, they are made to use a JA, SH, SDS, or SK QD bushing, which we also stock. Most of our single-groove 3V QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
AH97031 Idler Pulley For John Deere Combine & Forage Harvest
Threshing – Primary Countershaft AH97031 Idler Pulley – – Fits to Models: 6620, 7720, 8820, 4420, 9500, 9400, 9600, CTS, 9410, 9510, 9510SH, 9610, CTSII, 9450, 9550, 9550SH, 9650, 9650CTS, 9650STS, 9750STS, 9860STS, 9560, 9560SH, 9660, 9660CTS, 9660STS, 9760STS, 9560STS, 9570STS, 9870STS, 9670STS, 9770STS, S550, S660, S670, S670HM, S690HM, S760, S770
AH141762 AH111447 Pulley for John Deere Combine
&amp;amp;amp;lt;strong>Aplication</strong>
/>Spare part for farm machinery drive John Deere.
Designation
For tensioner drive belt vіd power unit for mechanical farm machinery.
Used to replace worn or damaged spare parts during repair works.
Properties
A detail in the form of a metal roll of the appropriate size and configuration in the central part of which is fixed bearing. A special coating is provided on the surface of the part, which provides maximum strength and durability.
AH140497 Idler Pulley For John Deere Combine
This AH140497 Idler Pulley works both as an OEM replacement and as a general purpose pulley for power transmission such as compressors, industrial fans, lawn mowers, snowblowers, and electric motors. It comes with a bore adapter to bush down from 17mm to 3/8” inside diameter.