DXG45/DXG45 D Series Shaft Mounted Gearbox for Quarrying and Mining Industry
DXG(ATA) series shaft mounted gearboxes are mechanical power transmission components that are used to drive a load at a reduced fixed ratio of motor speed. They are commonly used for driving conveyor belts, rotary screens, screw conveyors, mixers, crushers, elevators, and more. The most common type of shaft mounted gearbox is the helical gear reducer, which mounts directly to the driven shaft and is available in both parallel and shaft mounting configurations. Additionally, there are several accessories available to increase the versatility of the gearbox. The most common materials used for DXG(ATA) series shaft mounted gearboxes are aluminum and cast iron, and they are available in a wide range of reduction ratios to ensure maximum efficiency in all applications.
DXG50/DXG50 D Series Shaft Mounted Gearbox for Mining and Quarry
ATA Series Shaft Mounted Gearbox is widely applied in the mining industry for use in crushers, ore mills, cranes, screening machines, conveyors, and more. The motorized pulley (drum motor) is configured with an ATA shaft-mounted gearbox and then it directly transmits power to the conveyor. The ATA Series Shaft Mounted Gearbox has rated power from 1.1kW to 193kW, a rated torque range of 180 to 17000 NM, and an output speed of 25 – 300 RPM. These make this gearbox series a great choice for wide applications in quarry and mine. This model is widely used in belt conveyors and pulley drive systems.
Shaft Mounted Gearbox Reducer ZJY Series
ZJY series shaft mounted reducer adopts the installation mode of directly hanging on the power input shaft of the supporting host, omitting the connection accessories and reducer installation platform between them, and is suitable for bucket elevator, belt conveyor, scraper conveyor and other equipment.
Sus304 Stainless Steel Short Link Chain
* Material: Stainless Steel SS304, SS316, SS316L
* Surface Treatment: Polishing
* Tension Grade: G30/G50
* Size Customization is Available
* In Short/Mid/Long Link Series
* Advantage: Rust-Proof and Corrosion Protection
Shaft Collars With Double Splits Inch Series
The inch series two piece shaft collar is a type of mechanical component used to attach and secure rotating shafts to other mechanical components, such as gears, sprockets, or bearings. It consists of two separate pieces, a collar and a set screw, which are designed to fit around the shaft and tighten down to hold it in place. The two piece shaft collar itself is typically made of metal, such as steel or aluminum, and is designed to fit snugly around the shaft. It has a smooth inner surface that prevents damage to the shaft and an outer surface that may have grooves, knurls, or other features to enhance its grip. The set screw is inserted into a threaded hole in the shaft collar and tightened against the shaft to hold it in place.
Sus304 Medium Link Chain
* Material: Stainless Steel SS304, SS316, SS316L
* Surface Treatment: Polishing
* Tension Grade: G30/G50
* Size Customization is Available
* In Short/Mid/Long Link Series
* Advantage: Rust-Proof and Corrosion Protection
Leaf Chains for Sky Stacker LH2066 LH2466 LH2844 LH2846 LH2866
Leaf chains are made of interlaced plates held together by rivet pins. They are manufactured with precision, just like roller chains. The leaf chains are designed for applications that require a durable, strong linkage. They are made from special steel and undergo unique heat treatments, which ensure their strength and durability. Leaf chains are identified by the pitch and lacing, so if you’re using your Sky Stacker for a new application, you should use the BL series.
Ordinary Medium Link Chain
- Material: Low Carbon Steel
- Surface Treatment: Mainly Polishing, Electro-Galvanized, Hot-dip Galvanized
- Tension Grade: G25
- In Short/Mid/Long Link Series
Ordinary Long Link Chain
- Material: Low Carbon Steel
- Surface Treatment: Mainly Polishing, Electro-Galvanized, Hot-dip Galvanized
- Tension Grade: G25
- In Short/Mid/Long Link Series
G70 NACM90 Tow Chain
- Material: Alloy Steel
- Surface Treatment: Mainly Self-Color, Electro-Galvanized
- Tension Grade: G70
- Safety factor: Min 4
- Tow Chain, Transport Chain
G50 AISI316 High Tensile Stainless Steel Link Chain
- Material: Stainless Steel SS304, SS316, SS316L
- Surface Treatment: Polishing
- Tension Grade: G30/G50
- Size Customization is Available
- In Short/Mid/Long Link Series
- Advantage: Rust-Proof and Corrosion Protection
G70 Australian Standard Link Chain
- Material: Alloy Steel
- Surface Treatment: Mainly Electro-Galvanized
- Tension Grade: G70
- Safety factor: Min 4
- Transport Chain
G30 NACM96 Self Color Link Chain
- Material: Low Carbon Steel
- Surface Treatment: Mainly Polishing, Electro-Galvanized, Hot-dip Galvanized
- Tension Grade: G30
- Proof Coil Chain
G30 Sus304 Stainless Steel Long Link Chain
- Material: Stainless Steel SS304, SS316, SS316L
- Surface Treatment: Polishing
- Tension Grade: G30/G50
- Size Customization is Available
- In Short/Mid/Long Link Series
- Advantage: Rust-Proof and Corrosion Protection
NACM90 G30 5/16” Galvanized Safety Chain with S hook on One End
- Material: Low Carbon Steel
- Surface Treatment: Mainly Electro-Galvanized, Hot-dip Galvanized
- Tension Grade: G30
- Proof Coil Chain
G43 NACM90 Link Chain
- Material: Low Carbon Steel or Alloy Steel
- Surface Treatment: Mainly Polishing, Electro-Galvanized, Hot-dip Galvanized
- Tension Grade: G43
- High Test Chain
G30 Din766 Electro Gavanized Short Link Chain
- Material: Low Carbon Steel
- Surface Treatment: Mainly Polishing, Electro-Galvanized
- Tension Grade: G25/G30
- In Short/Mid/Long Link Series
G25 DIN5685 Link Chain
- Material: Low Carbon Steel
- Surface Treatment: Mainly Polishing, Electro-Galvanized
- Tension Grade: G25/G30
- In Short/Mid/Long Link Series
G30 DIN763 Polishing Long Link Chains
* Material: Low Carbon Steel
* Surface Treatment: Mainly Polishing, Electro-Galvanized
* Tension Grade: G25/G30
* In Short/Mid/Long Link Series
5V Series Cast Iron Four-Groove QD Sheaves for “5V” Belts
5V series four-groove QD (quick detachable) bushed sheaves are manufactured for 5V, 5VX, banded 5V, and banded 5VX belts. They range from 4.40″ to 50.00″ in diameter. Depending on the sheave size, they are made to use an SD, SK, SF, E, F, or J QD bushing, which we also stock. Most of our four-groove 5V QD sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.
WPWX Series Universal Speed Worm Gearboxes
We produce WP series and RV series worm speed reducers, single, double, and universal speed reducers. The gearboxes can be applied to many industrial areas, such as Metallurgical, mines, lifting, transportation, petrochemical, construction, textile, pharmaceutical, food, environmental, light electric, plastic machine, paper, parking equipment, and so on. Our technical engineers can choose a model for you according to your request, and we also can supply our factory catalog for your reference.
Agricultural Sprayer Gearbox – Replacement of Comer Code D27A D27J D27B
The agricultural sprayer gearbox is a type of gearbox used in agricultural spraying equipment. It is designed to provide a reliable and efficient power transmission system for the sprayer. The gearbox is usually made of durable materials such as steel or aluminum and is designed to withstand the harsh conditions encountered in agricultural spraying.
Short Pitch Conveyor Chain Attachments
Roller chains may be adapted to conveying applications by the addition of attachments. The standard attachment types include bent or straight-type attachments on one or both sides, extended pins, and wide contour attachments.Standard Roller Chain Attachment: A1, A2, K1, K2, SA1, SA2, SK1, SK2, WA1, WA2, WK1, WK2, D1, D5, GK1.The purpose of using roller chain attachments is to offer a wider range of capabilities for your roller chains. We offer a lot of attachments that can be used with roller chains that are specific to certain special functions. When you couple attachments with roller chains, you’ll find that your roller chains are even more capable of moving heavy equipment while remaining cost-effective, reliable, and sturdy.
Square Baler Gearbox FK157 for Straw Chopper
The Square Baler Gearbox FK157 is a specialized gearbox designed for use in square balers with integrated straw choppers, a critical feature in modern agricultural machinery for crop processing and bale preparation. The FK157 Square Baler Gearbox is responsible for transmitting mechanical power from the tractor’s Power Take-Off (PTO) to the baler’s operational components, including the chopping mechanism that processes the straw or other crop residues. It regulates the operational speed of the chopping mechanism, ensuring that it functions at the correct speed to efficiently chop the straw into the desired size, which is crucial for the quality and uniformity of the bales.
