Backstop Clutch
CKNZ Sprag Backstop Clutch
The CKNZ series sprag backstop clutch works in thermal power, metallurgy, ports, and mining.Has obtained the good economic and social benefits. CKNZ series sprag backstop clutch put into productionat high speed, low speed rotating equipment as well as external installation, a built-ininstallation such as different series of dozens of varieties.
MG/MI One-Way Clutch
MG/MI series is a one-way clutch designed for high-speed applications. Cam assembly engineered for optimum performance and increased cage capacity. Two ball bearings included to support radial load and concentricity between races.
RSBW Sprag Type Freewheel
Type RSBW is a DC sprag type freewheel. It is suitable for low-speed applications and uses O-rings for sealing. The unit comes with grease and is ready to install in a horizontal or vertical position. Primarily used as a backstop, this type provides a high torque capacity with a minimum space requirement.
RSBI Centrifugal Sprag Freewheel
Type RSBI is a centrifugal sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling. It is a non self-supported type. Bearings must be provided to ensure con-centricity of the inner and outer race.
MZ Backstop Clutch
The MZ Backstop Clutch comes prelubricated with special grease, requires no maintenance, and offers easy installation and handling.
RSCI Centrifugal Lift Off Sprag Freewheel
Type RSCI is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling. Primarily designed as a backstop, this type can be alsoused as an overrunning clutch in crawl drives, where the overrunning speed is high but the driving speed is low and does not exceed the maximum driving speed.
GN backstop clutch
GN backstop clutch is a kind of low speed of roller type plugging device, often with reducer, used in belt conveyor, hoist, electric drum, and other need a non-return device. Non-return quickly, small reverse distance, long life, can withstand the torque.
DSN Backstop Clutch
DSN backstop clutch can effectively prevent material due to gravity retrograde or falling accident happened, and the non-return state, theentire drive is still in the unloading state, will not affect to the motor speed reducer drive repair and replacement parts, to prevent damage of because of the drive system J and appear be retrograde accident on safety protection. Non-return is used in large inclined belt conveyor, bucket elevator, scraper conveyor of non-return protection, other equipment should consult use.
FXM Overrunning Clutch
The FXM Overrunning Clutch is a non-bearing sprag freewheel with centrifugal non-contact X. When the inner ring rotates at high speed, it ensures wear-free operation. The FXM clutch works as: 1. A backstop (usually at high speeds). 2. An overrunning clutch (usually at low speeds).
ND (NJ, NYD) Roller Backstop
The ND (NJ, NYD) Roller Backstop is a low-speed anti-reverse device. It has a compact structure and light weight, it locks reliably and runs smoothly without sticking, it is also easy to install and does not need high installation accuracy.
NF Roller Type Freewheel
Type NF is a roller type freewheel non-bearing supported, bearings are regured to support arial and radial loads. Lubrication and sealing must also be provided by the installation.standard lubrication is grease.The nominal outside diameter is a standard ball bearing dimension.
CKZF-A Centrifugal Sprag Freewheel
Type CKZF-A is a centrifugal sprag type freewheel with the inner race rotating. Using two 60 series bearings. Only the inner race is designed for freewheeling. Units are delivered oil lubricated.
CKF-A Centrifugal Sprag Freewheels
Type CKF-A is a centrifugal sprag type freewheels with the inner race rotating. Only the inner race is designed for free- wheeling, It is a non self-supported type.